Service Engineer

£ 35,000 - £ 37,500 per year
Bradley Stoke
Posted: 15 August 2022
Expires: 03 February 2023

SERVICE ENGINEER / BRISTOL – PERMANENT ROLE

Location: Bradley Stoke, Bristol
Assignment: Permanent contract
Hours: Saturday, Sunday and Monday 07:00am – 19:00pm OR Friday, Saturday and Sunday 19:00pm – 07:00am
Salary: £35,000 - £37,500 (dependent on experience)

Gap personnel, acting as an employment agency, are currently recruiting for 2 Service Engineers on permanent contracts, one on day shifts and one on night shifts based in Bradley Stoke.

The successful candidates will be responsible for identifying and fixing faults on mailing machines and associated equipment. To assist production in gaining best running speeds whilst reducing remake waste to continually improve efficiencies through production.

Duties as a Service Engineer:

  • Report all Health and Safety matters immediately to Manager and follow SSOW
  • To comply with the Information Security Management Systems and its associated policies
  • Effect repairs to mailing machines and associated equipment where necessary, such as mechanical fault repairs
  • Maintain, support and service any piece of production associated equipment, Cutters and Strapping machines
  • Liaise with Production Management Teams on machine performance problems and improvements
  • Provide ideas and feedback to the Production Management teams on machine problems
  • Maintain proper administration of parts usage
  • Communicate effectively problems and solutions either written or verbally
  • Communicate to relevant stakeholders information that can assist the site to have a greater efficiency
  • Be a strong continuous improvement leader, look for opportunities, report on successes and failures
  • Mentor machine operators in order to enhance their operating skills
  • Be pro-active at all times to help maximize productivity
  • Highlight and bring to Managers attention any exposure to risk for the department or business
  • Ensure a clear and precise handover is given to the oncoming team members
  • To keep the work area clean and tidy at all times

About you:

  • Experience in a fast paced manufacturing environment
  • Good diagnostic skills
  • Ability to follow electrical diagrams
  • Can work as part of a team
  • Ability to do board level repairs preferred but not essential
  • Practical maintenance engineering background with electrical emphasis preferred

Benefits:

  • Access to Learning web page where you can opt into upskilling courses and training to develop you as an individual in addition to your on the job training
  • Mental Health First Aid accredited workplace
  • Workplace Well-being support and resource
  • Talent and succession program
  • Disability confident employer
  • Eye care benefits
  • Bupa Cash Plan option
  • Fresh fruits every day
  • Free vending machine for refreshments
  • Free onsite parking
  • £500 reward for introducing a friend after 6 months

To apply for this role, please submit your CV via the Apply Now button or contact our Exeter office on 01392 273665 for more details.

 

Please note
If this job is a temporary role, Hawk 3 Talent Solutions is operating as the employment business. If this role is permanent, Hawk 3 Talent Solutions is operating as the employment agency. All adverts are refreshed weekly, applications to be submitted by close of play Friday. 
Whilst we endeavor to respond to all applications individually, due to high volumes, this is not always possible. Successful applications will be contacted within one week of the closing date. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us, you understand that your data will be processed in line with our Privacy Policy. Here’s our full privacy policy: https://www.hawk-3.com/pages/privacy-policies Thank you for your interest in this role.

 
Image

Get email alerts for NEW jobs like this!

More jobs like this

Get job recommendations just for you!Sign up now
Multi Skilled Maintenance Engineer
Barnsley
Posted: 02 February 2023
Expires: 04 March 2023

Multi Skilled Maintenance Engineer

Location: Barnsley

Nights: Sunday - Thursday: 10:00pm - 6:00am

Salary: Negotiable DOE

 

An opportunity has arisen for Multi Skilled Maintenance Engineer to join our client, a specialist manufacturer in the Barnsley area. Excellent salary and progression opportunities for the right candidate

The focus of the role is to work closely with the production team to ensure that machinery downtime is kept to a minimum and that all maintenance is conducted in advance to avoid production disruption.

They will need to work collaboratively with the engineering team, supporting and identifying means of improving plant productivity. They will ensure that any spare parts, materials, and equipment are available. They will be able to investigate and establish the causes of all breakdowns and machinery speed losses and record any repairs to ensure recurrent faults can be recognised.

 

The Candidate:

To successfully carry out this role you will need to be multi-skilled preferably with an Electrical bias. Electrically you will be able to fault find on single and three-phase systems, servo motors and AC motors, sensors, and various control systems. There will be an element of electrical installation as required, typically lighting and small power. Knowledge of plc electronics desired.

Mechanically you will be able to work on drive train systems, rollers, gearboxes, shafts, pneumatics, and some hydraulics. There is a requirement to be able to strip machine assemblies to component level and rebuild. You will also need to have demonstrated experience in maintenance engineering and show the ability to work off your own initiative.

Education to NVQ Level 3 or equivalent is preferred, but not essential as we would consider "time served" as experience.

You will be multi-skilled and have strong communication skills and excellent organisational skills.

 

What will you receive?

Competitive pay negotiable depending on experience

28 days holiday (increases with service) including a fixed Christmas break

Pension

Free parking

Online Holiday booking

We offer a competitive benefits package which includes:

Perkbox membership which includes discounted gym membership, active wear and nutrition, savings on everyday shopping, cinema tickets, food and drink and emotional wellbeing support.

WE CARE membership which includes easy access to 24/7 GP consultations, mental health support, get fit programmes and much more.

The opportunity to gain further qualifications through external training

Career progression and training opportunities

To Apply please follow the application process for the site this job is advertised on or email your CV to Rachel.Sheehy@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Hawk 3 Talent are operating as an employment agency on behalf of its client.

 

Save Full details
Multi Skilled Maintenance Engineer
Peterborough
Posted: 02 February 2023
Expires: 04 March 2023

Multi Skilled Maintenance Engineer

Location: Peterborough

Hours: Mon to Fri 6-2pm and 2-10pm rotating weeks

Salary: Negotiable DOE

 

An opportunity has arisen for Multi Skilled Maintenance Engineer to join our client, a specialist manufacturer in the Peterborough area. Excellent salary and progression opportunities for the right candidate

The focus of the role is to work closely with the production team to ensure that machinery downtime is kept to a minimum and that all maintenance is conducted in advance to avoid production disruption.

They will need to work collaboratively with the engineering team, supporting and identifying means of improving plant productivity. They will ensure that any spare parts, materials, and equipment are available. They will be able to investigate and establish the causes of all breakdowns and machinery speed losses and record any repairs to ensure recurrent faults can be recognised.

 

The Candidate:

To successfully carry out this role you will need to be multi-skilled preferably with an Electrical bias. Electrically you will be able to fault find on single and three-phase systems, servo motors and AC motors, sensors, and various control systems. There will be an element of electrical installation as required, typically lighting and small power. Knowledge of plc electronics desired.

Mechanically you will be able to work on drive train systems, rollers, gearboxes, shafts, pneumatics, and some hydraulics. There is a requirement to be able to strip machine assemblies to component level and rebuild. You will also need to have demonstrated experience in maintenance engineering and show the ability to work off your own initiative.

Education to NVQ Level 3 or equivalent is preferred, but not essential as we would consider "time served" as experience.

You will be multi-skilled and have strong communication skills and excellent organisational skills.

 

What will you receive?

Competitive pay negotiable depending on experience

28 days holiday (increases with service) including a fixed Christmas break

Pension

Free parking

Online Holiday booking

We offer a competitive benefits package which includes:

Perkbox membership which includes discounted gym membership, active wear and nutrition, savings on everyday shopping, cinema tickets, food and drink and emotional wellbeing support.

WE CARE membership which includes easy access to 24/7 GP consultations, mental health support, get fit programmes and much more.

The opportunity to gain further qualifications through external training

Career progression and training opportunities

 

To Apply please follow the application process for the site this job is advertised on or email your CV to Rachel.Sheehy@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Hawk 3 Talent are operating as an employment agency on behalf of its client.

 

Save Full details
Quality Inspector
£ 24,000 - £ 24,000 per year
Cirencester
Posted: 01 February 2023
Expires: 03 March 2023

Quality Inspector

Location: Cirencester

Permanent, Full Time

Hours: Monday -Friday -Double shifts 5.30am - 2pm / 1.55pm - 10.25pm

Salary: £24k

Hawk 3 Talent Solutions are looking to recruit a Quality Inspector for a permanent role with our client, a specialist global manufacturer based at their site based in Cirencester.

The Quality Inspector should ensure that products are inspected to the correct requirements, specifications and materials as agreed with the customer.

To release conforming product on the correct release documentation and information

Key Responsibilities

To approve product to drawings and customers supporting documentation.

To provide assistance and support within the business regarding product conformance.

Operate singularly or as part of a team that makes the most effective use of inspection resource.

Any other reasonable duties requested by Head of Quality.

Recording of output from inspection activities on the corresponding software e.g. Mestec, Sage

Conducting inspection activities across all areas of the business including, but not limited to: - Clean Room, Goods Inwards, Manufacturing Cells, Final Inspection.

Ensure compliance to training activities and support buddy training as required

Ensuring that all equipment used is suitably with calibration and is free from damage prior to use.

Retrieval of items due calibration in a timely manner and as per list supplied

Conduct periodic checks on inspection equipment where specified including, but not limited to: - light levels, calipers prior to use et

 

Knowledge:

Ability to use measuring equipment such as rulers, callipers, gauges or micrometers to inspect, test and measure product.

Experience of working with customer drawings and supporting documentation to ensure correct manufacture and assembly of product

Experience of regulatory document recording

Good working knowledge of Quality procedures.

 

Skills

Computer skills - Microsoft excel, word and PowerPoint.

Good organisational and time management skills.

Good verbal & written communication

Able to engage with wider team

Setting and implementing high standards of housekeeping in your department

Competitive progressive salary which increases as you gain more skills and experience

Annual bonus

Pension starts at 6% increasing to 9.7% after 18 months

Life Assurance - 6X your basic salary

BUPA for you and your family

Electric recharging points in our ample free parking area

Subsidized canteen offering hot and cold food

Wellbeing programme

A clean and safe factory environment with surrounding offices supporting the manufacturing function

Monthly charity events and annual social events

Work within a team that really cares about better health outcomes to patients

 

Closing date is 14 th of March 2022

To Apply please follow the application process for the site this job is advertised on or email your CV to maria.thorne@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
CNC Machine Operator
£ 11 - £ 11 per hour
Poole
Posted: 01 February 2023
Expires: 03 March 2023

CNC MACHINE OPERATOR / POOLE - PERMANENY VACANCY

Location: Poole, Dorset

Job type: Permanent contract

Hours: Monday to Friday 08:00am - 17:00pm

Salary: £11.00 per hour

Hawk 3 Talent Solutions, operating as an employment agency, are currently recruiting for Trainee and experience CNC Machine Operators based in Poole, Dorset on a full-time permanent contract.

The successful candidate will be managing computer numeric controlled equipment from setup to operation, producing components from different materials as well as being tasked with monitoring machinery, inspecting finished products, and leading test runs.

Duties as a CNC Machine Operator:

      Overseeing machinery setup to make sure arrangements are safe and ready to handle assigned load

Loading materials into machines

Adjusting speed, the path of cut and other factors of machines

Performing work following companies operating standards and international regulations

Regularly inspecting machines for mechanical and safety issues

Making sure machines remain well stocked so that there are as few interruptions of service as possible

Verifying inventory and placing orders where necessary

Examining machinery production output to verify the product is acceptable to move onto the next part of the production process

Maintaining and updating records about the machine's operation and the teams overall performance

Reading up on machinery features and attending safety and other courses to enhance on the job operations

Keeping focus on safety by helping others to conduct themselves appropriately around operating machinery

Translate engineering drawings and requirements into dimensions for production

Communicate logistics issues that arise in the process of creating a component

About you:

      Able to work to a flexible schedule to keep up with production demand during busy periods

Attention to detail

Able to work well as a team

Excellent communication skills

To apply for this role, please submit your CV via the Apply Now button or contact Shannon McMahon on 07485335875 for more information.

 

Save Full details
Orbital TIG Welder
£ 30,134 - £ 30,134 per year
Redditch
Posted: 01 February 2023
Expires: 03 March 2023

Are you an experienced TIG Welder (Orbital) do you have high standards for your work? If so, this is a great opportunity with a competitive Salary and Consistent Mon - Friday hours including an early finish on a Friday.

Role: Permanent vacancy Full time (38 Hrs)

Hours: 7AM- 3:45PM Mon - Thursday 7AM - 7AM-12PM Friday Early Finnish.

Pay: £15.25 per Hour

Location: Redditch

The Company:

Global Manufacturing business, you will be working in the Aerospace Location in Redditch, A great Place to develop your skillset and Work with like-minded individuals who take pride in their Work, they offer a competitive Salary, and the following Benefits

Benefits

  • 25 days holiday plus Bank Holidays
  • Company Sick pay
  • Flexible Benefits with options to purchase Health Cash Plan, Additional Annual leave etc.
  • Employee Discounts
  • 3x annual salary life assurance

About You

  • Secondary School Education
  • Previous experience in a manufacturing environment with welded components
  • Experience in Metal fabrication or fabrication before welding is preferable
  • General Computer Skills for access to drawings and procedures preferred

Job Purpose:

  • Orbital TIG welding of rigid and flexible tube assemblies, and components predominately for the Aerospace industry and complying within an AS9100 and NADCAP approved manufacturing facility. This could also include fabrication or finishing operations associated with these jobs.
  • A More Exhaustive list of Duties is below.
  • Orbital TIG welding and manual tacking of mainly tube ranging from 1/4 inch to 2-inch diameter both thin wall and thick tubing. Materials include but are not limited to Stainless Steel, Inconel, Titanium.
  • Strict following of Data Cards, process specifications, Engineering Drawings, Standard Work Instructions, Preventative Maintenance, 5S standards and audits, and any other systems or procedures to maintain high Aerospace standards of product integrity and lean manufacturing execution.
  • Ability to use, maintain, program orbital TIG welding equipment and the use of measurement equipment such as shadowgraph, borescopes, Vernier,
  • micrometre for inspection and fabrication purposes.
  • Able to inspect own work including but not limited to fit to fixture after welding, all aspects of successive inspection, and inspection of welds as a qualified visual weld inspector.
  • Fabrication and finishing of welded assembles including but not limited to: Prepare components to weld ensuring they conform to a fixture or drawing, Sizing, Facing, Polishing, Linishing, cleaning, post weld polishing, cleaning, and packing.
  • Active participation in Safety and Continuous Improvement actives including but not limited to: Guard Check sheets, Risk assessments, Problem solving to reduce scrap & rework, productivity, and standard work events, improve workplace organisation and 5S, on the job training of team members.

Hawk 3 Talent Solutions are acting as an Employment Agency on behalf of its client

To Apply please follow the application process for the site this job is advertised on or email your CV to Paul.Hillman@hawk-3.com By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment, and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Save Full details
Manual TIG Welder
£ 16 - £ 16 per hour
Redditch
Posted: 31 January 2023
Expires: 02 March 2023

Are you an experienced TIG Welder (Manual, Orbital) do you have high standards for your work? If so, this is a great opportunity with a competitive Salary and Consistent Mon - Friday hours including an early finish on a Friday.

Role: Permanent vacancy Full time (38 Hrs)

Hours: 7AM- 3:45PM Mon - Thursday 7AM - 7AM-12PM Friday Early Finnish.

Pay: £16.44 per Hour

Location: Redditch

The Company:

Global Manufacturing business, you will be working in the Aerospace Location in Redditch, A great Place to develop your skillset and Work with like-minded individuals who take pride in their Work, they offer a competitive Salary, and the following Benefits

Benefits

  • 25 days holiday plus Bank Holidays
  • Company Sick pay
  • Flexible Benefits with options to purchase Health Cash Plan, Additional Annual leave etc
  • Employee Discounts
  • 3x annual salary life assurance

About You

  • Welding qualification or internal equivalent preferred
  • Minimum of 5 years Welding - 10 years preferred
  • Manual Welding and fabrication
  • General Computer Skills for access to drawings and procedures

Job Purpose:

Manual and Orbital TIG welding of rigid and flexible tube assemblies, brackets, and components predominately for the Aerospace industry and complying within an AS9100 and NADCAP approved manufacturing facility. This could also include fabrication or finishing operations associated with these jobs.

A More Exhaustive list of Duties is below.

  • Manual and Orbital TIG welding of mainly tube ranging from 1/4 inch to 2 inch diameter both thin wall and thick tubing. Materials include but are not limited to Stainless Steel, Inconel, Titanium, and Aluminium.
  • Strict following of Data Cards, process specifications, Engineering Drawings, Standard Work Instructions, Preventative Maintenance, 5S standards and audits, and any other systems or procedures to maintain high Aerospace standards of product integrity and lean manufacturing execution.
  • Ability to use, maintain, program orbital and manual TIG welding equipment and the use of measurement equipment such as shadowgraph, borescopes, Vernier, micrometre for inspection and fabrication purposes.
  • Able to inspect own work including but not limited to fit to fixture after welding, damage, and finally inspection welds as a qualified visual weld inspector.
  • Fabrication and finishing of welded assembles including but not limited to: Prepare components to weld ensuring they conform to a fixture or drawing, Sizing, Facing, Polishing, Linishing, cleaning, post weld polishing, cleaning, and packing.
  • Active participation in Safety and Continuous Improvement actives including but not limited to: Guard Check sheets, Risk assessments, Problem solving to reduce scrap & rework, productivity, and standard work events, improve workplace organisation and 5S, on the job training of team members.

Closing Date 27th February 2023

Hawk 3 Talent Solutions are acting as an Employment Agency on behalf of its client. To Apply please follow the application process for the site this job is advertised on or email your CV to Paul.Hillman@hawk-3.com By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment, and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Save Full details
Business Development Manager
Derby
Posted: 02 February 2023
Expires: 04 March 2023

Are you an experienced Business Development Manager, with a proven record of success, delivering growth within Logistics, Supply Chain Solutions ?

Would you like to work for a successful, privately owned business with a history over 100 years and a global footprint ?

The Opportunity

Has arisen for a Business Development Manager with the drive and determination to deliver the results required to ensure the continued growth of the business, specifically the development of the provision of Logistics & Industrial Services within Aerospace and associated domain. De signing and developing value-added solutions for its industrial partners

Responsibilities

  • You will build positive and professional relationships with major customers in the industry in the UK to ensure that we delight and provide a positive Customer Experience. Your mission will be to collect and understand the Voice of the Customer and translate comments and areas of improvement into tangible and actionable plans.
  • You will support the growth of the business activities through a collaborative team approach, involving international discussions with staff in Europe, ensuring that new businesses are gained at the highest possible margins and revenues.
  • You will provide regular and accurate sales forecast for the assigned and/or targeted accounts, using our CRM SalesForce. Formulate, develop, achieve the annual sales budget and report variances to plan.
  • Your expertise and knowledge of industrial clients & prospects in the UK will enable you to define a development strategy and support the management of key accounts for the region.

Requirements of Business Development Manager

  • Ideally you will have about considerable experience in sales business development, within logistics, transportation and mechanical aerospace.
  • Demonstrable and successful experience in a sales function involving successful negotiations
  • Exemplary communication and management skills in order to deal with complex technical and commercial issues at customers and all internal departments.
  • Ability to travel across the UK and possibly overseas, Full clean driving licence and passport.

Benefits of Business Development Manager

  • Excellent remuneration inc. Basic, Bonus, plus Competitive Pension and Life Assurance package.
  • Company contribution healthcare support scheme.
  • Free on-site car parking.
  • 25 days annual leave after qualifying service.
  • Career development in UK and across the Group.

Closing date is 3rd March 2023

Hawk 3 Talent Solutions are acting as an employment agency on behalf of its client.

To Apply please follow the application process for the site this job is advertised on or email your CV to craig.cartwright@hawk-3.com . By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
Audit Senior
£ 45,000 - £ 47,000 per year
Bath
Posted: 02 February 2023
Expires: 04 March 2023

Job Title: Audit Senior

Location: Bath/Swindon/Trowbridge/Taunton

Job Type: Permanent

Hours: Flexible / Hybrid

Salary: Negotiable DOE

Hawk-3 are currently looking for an Audit Senior to join a leading independent Firm of Chartered Accountants and Commercial Business Advisers. With offices across the South West of England, and as members of the highly regarded network Prime Global, we have local knowledge with national and international reach. Working with some of the most exciting and dynamic businesses across a range of sectors, from Rural and Manufacturing, to Academies and Not for Profits. Our diverse sector specialism and broad geographical reach across the South West means we can offer employees a broad range of experience both in the office and at a client's premises.

Some key responsibilities are:

Audit accounts, interpreting and verifying all information provided by clients.

Prepare annual and management accounts ensuring details are accurate.

Complete basic tax computations for clients.

Compose letters to clients, tax office and the registrar of companies.

Write clear file notes which can be easily understood by others.

Produce neat working papers to reflect the accounts produced (ensuring clear cross-references).

Complete detailed schedules for each set of accounts to ensure the analysis is clear and logical.

Identify problems with data provided by clients.

Plan and prioritise work according to client and partner needs/deadlines and instructions.

Delegate and explain work to junior members of the team, clearly explaining priorities.

Advise and coach junior members of the team concerning work to be completed.


About you

You will be Qualified ACA/ACCA or qualified by experience

Already have experience of working as an Audit Senior

Positive and outgoing

Self sufficient when necessary and able to work alone for periods of time

Pro-active and willing to take responsibility for own areas of work not waiting to be asked to undertake key responsibilities

Tact and diplomacy able to explain issues to colleagues, partners & clients

Organised, methodical, detail conscious

Self confident and able to demonstrate effective use of personal judgement

Flexibility able to deal with changing priorities, deadlines and circumstances, willing to work with others

Discreet and confidential able to stand their ground where necessary regarding queries from others

Creative ideas to assist in meeting client expectations

Mobile across offices and client sites

Able to work outside of normal office hours when client needs require it

Hawk 3 Talent Solutions are operating as an employment agency

To Apply please follow the application process for the site this job is advertised on or send your CV to brooke.gilmore@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

 

Save Full details
Account Manager
£ 32,000 - £ 37,000 per year
Barnstaple
Posted: 02 February 2023
Expires: 04 March 2023

Job Title: Accounts Manager
Location: Axminster
Job Type: Permanent
Job Hours: Full Time
Salary: Circa 45K

Main duties:

  • Overseeing and controlling a portfolio of clients to ensure compliance for tax and accounting purposes.
  • To be the first point of contact for clients.
  • Supervising staff and managing workflow through the office.
  • Responsible for developing junior staff.
  • Preparing and reviewing financial statements for limited companies, partnerships and sole traders.
  • Preparing tax computations and corporate and personal tax returns.
  • Reviewing of VAT return preparation.
  • Filing documents with HMRC and Companies House on client's behalf.
  • Dealing with correspondence for clients.
  • Providing business set-up services for clients including incorporations and HMRC registrations.
  • Providing value added business advice including ways to minimise tax liabilities and maximise profits.
  • Identifying opportunities to offer clients additional services.
  • Assisting the partners and directors with specialist assignments as they arise, including providing technical support as necessary.
  • Comply with internal policies and procedures, ethical standards and regulatory requirements.

Attributes, skills, experience and qualifications:

  • Outgoing, socially confident and emotionally controlled.
  • A positive attitude, friendly and approachable.
  • Resilient, able to multi-task and work independently / flexibly.
  • Adaptable, organised and conscientious.
  • Takes the initiative, ability to prioritise and meet deadlines.
  • Discreet, professional and team orientated in approach.
  • Good working knowledge of general IT Word, Excel, PowerPoint and Social Media programmes.
  • Excellent verbal and written communication skills, with proven accuracy and an eye for detail.
  • Ability to present information effectively and concisely in emails and documents.
  • Experience of working at an Accounts Manager level in an accountancy practice.
  • Previous experience in accounts preparation for limited companies and unincorporated businesses.
  • Previous experience in preparing tax computations and returns for limited companies, unincorporated business and individuals.
  • Ideally AAT or ACA / ACCA qualified.

Terms

  • 25 days annual leave plus bank holidays.
  • Annual salary review.
  • Death in service 3 x annual salary.
  • Access to Westfield Rewards and Health scheme.
  • 24-hour external Employee Assistance Programme helpline.
  • Flexible benefits including Buy and Sell holiday, Cycle to Work, Payroll Charity Giving and Private Medical Insurance.
  • Introducing clients and staff commission schemes.
  • Pension 3% rising to 4% (but matched up to 6%) after 4 years' service

 

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client

To Apply please follow the application process for the site this job is advertised on or email your CV to Brooke.Gilmore@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
Trainee Estimator
£ 20,000 - £ 25,000 per year
Poole
Posted: 01 February 2023
Expires: 03 March 2023

TRAINEE ESTIMATOR / POOLE - PERMANENY VACANCY

Location: Poole, Dorset

Job type: Permanent contract

Hours: Monday to Friday 08:00am - 17:00pm

Salary: £20,000 - £25,000 per annum, dependent on experience

Hawk 3 Talent Solutions, operating as an employment agency, are currently recruiting for Trainee Estimator based in Poole, Dorset on a full-time permanent contract.

The successful candidate will be responsible for compiling estimates of how much it will cost to provide a client or potential client with products / services. You will be working out how much a project is likely to cost and creating budgets accordingly.

This role involves assessing material, labour and equipment required and analyzing different quotes from sub-contractors and suppliers.

Duties as a Trainee Estimator:

      Preparing work to be accomplished by gathering information and requirements

Preparing budget by studying plans, updating specifications, identifying, and projecting costs for each elevation

Evaluate offers to purchase by costing changes, additions, and site requirements

Obtaining bids from vendors and subcontractors to specify materials, identifying qualified subcontractors, and negotiating prices

Resolving cost discrepancies by collecting and analyzing information

Preparing reports by collecting, analyzing, and summarizing information and trends

Maintaining quality service and following organization standards

Maintaining continuity among corporate, division and local work teams by documenting and communicating actions, irregularities, and continuing needs

Maintaining professional and technical knowledge by attending education workshops, reviewing professional publications, establishing personal networks and participating in professional societies

General administration duties - answering and making phone calls, liaising with subcontractors and clients, checking and responding to emails, updating outstanding quote sheets

To apply for this role, please submit your CV via the Apply Now button or contact Shannon McMahon on 07485335875 for more information.

 

Save Full details