Trainee Quality Assistant

£ 7.8 - £ 9.59
Posted: 22 July 2022
Expires: 21 August 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client .

Permanent

Location: Pudsey, Leeds.

Salary: £7.80 - £9.49p/h (Depending on Experience) Attendance Bonus 

Working Hours: 30 hours, Monday - Thursday (between the hours of 08:00am - 16:30pm) & Friday (08:00 - 13:00pm)

Main Responsibilities of the Trainee Quality Assistant

      To work with the Quality Manager and ensure that the policy outlined in the

Quality & Environmental Manual under ISO9001 / 14001 and the operational details specified in Codes of Practice are practised effectively

To provide regular, periodic quality statistics and analysis for review and corrective action and report this monthly to the Quality Manager

To conduct internal calibration and work with third party authorities

To participate in Quality System Auditing internally and at suppliers

Ensure that corrective action is taken resulting from quality audits, as dictated by Codes of Practice

Administer the customer complaints, code of practice procedure such that effective remedial action is taken to minimise recurrences

Administer supplier performance rating

Liaise with BSI and other inspection authorities affecting the business

To foster the theme of continuous improvement through better organisation, better teamwork, and better control at all levels. Also to promote the concept of personnel being responsible for the quality of their own work

Conduct patrol and final inspection in the different production units

Implementation, maintenance, and improvement of works Statistical Process Control systems.

Work with management to implement 5S and lean manufacturing techniques across the organisation

Experience and Skills required

The ideal candidate should be educated to GCSE level C or above in maths and English, and be competent using a PC (experience with MS Office would be an advantage).

Closing date is 22.08.2022

To Apply please follow the application process for the site this job is advertised on. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy . Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Please note
All adverts are refreshed weekly, applications to be submitted by close of play Friday. 
Whilst we endeavor to respond to all applications individually, due to high volumes, this is not always possible. Successful applications will be contacted within 1 week of the closing date. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us, you understand that your data will be processed in line with our Privacy Policy. Click here to read our full Privacy Policy. Thank you for your interest in this role.

 
Image

Get email alerts for NEW jobs like this!

More jobs like this

Get job recommendations just for you!Sign up now
CNC Machinist
£ 12.3 - £ 17.6
Posted: 19 July 2022
Expires: 10 September 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client.

Permanent

Location: Pudsey, Leeds

Salary: 12.36 - £13.60 ( 26% shift allowance)

Working Hours: 2pm – 11.45pm (Monday - Thursday)

Main Responsibilities

  • Feeds and runs CNC machines
  • In-process controls using manual devices
  • Finished product inspections using CNC CMM machines
  • Problem- aware, effective and active handling of the CNC machines
  • Reporting in SAP and hard copies.

Experience and Skills required

  • Previous machining experience
  • Professional handling of CNC machines
  • Good capacity to work in a small team
  • Methodical skills like 5S or CIP useful
  • Ability to demonstrate initiative and work independently
  • Willing to improve themselves and their work environment

Closing date is 12.05.2022

To Apply please follow the application process for the site this job is advertised on. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Save Full details
Maintenance Engineer
£ 33000 - £ 33000
Posted: 11 August 2022
Expires: 10 September 2022

Maintenance Engineer

Job Type: Permanent

Location: Gloucester

Hours of work: Monday to Friday. Working hours: 6.00 AM to 2.00 PM and 12.00 PM to 8.00 PM. The role also includes a 1 week in 5 on call rota.

Salary: £33'000 per year

Summary:

Our client is UK specialist in composites and mouldings based in Gloucester are currently recruiting for a Maintenance Engineer to join their team. Some of the duties are to maintain thermal oil presses, pumps, CNC, water jet and lathers to name a few. This is a very diverse role, which can include facility work, electrical and mechanical. You will be reporting directly to the Maintenance Supervisor or/and Manager

Required Duties:

- Maintenance and repairs on a range of industrial factory equipment

- Electrical, Single, 3 phase Motors and PLCs

- Mechanical engineering, Pneumatics, bearings, pumps, valves, chains and boilers, CNC routers and water jets

- Able to work well in a team

- Provide a reactive and proactive maintenance service

- Provide a multi-skilled maintenance service, which covers electrical and mechanical disciplines

- Provide a service that ensures all mechanical and electrical equipment is running to optimum performance

- Provide a service that ensures all key performance indicators are met

- Carry out modifications and installations when required

- Liaise with sub-contractors and external suppliers

- Take ownership of tools and equipment provided and ensure they are maintained to an appropriate standard

Skills Required :

- Time served maintenance engineer is preferred, City and Guilds or NVQ an advantage but not critical.

- MEWP

- FLT counterbalance

Benefits ;

- 26 days of annual leave

- 3% Employer Pension Contribution

- Income protection scheme and Private medical cover

- Cycle to work scheme

Closing date is 15th of September 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client.

To Apply please follow the application process for the site this job is advertised on or email your CV to maria.thorne@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
Manual Turner
£ 25000 - £ 40000
Posted: 11 August 2022
Expires: 10 September 2022

Manual Turner

Job Type: Permanent

Location: Gloucester

Hours of work: Shift (0600-1400/1400-2200/2200-0600)

Salary: £25,000 to £36,000 Inc double days shift allowance or £25,000 to £40,000 Inc night shift allowance

Summary:

Our client is UK specialist in composites and mouldings based in Gloucester are currently recruiting for a Manual Turner to join them. It is an exciting time to join a fast-growing company where opportunities have arisen for a right candidate. Skilled conventional turner required to work on a variety of production machinery. While the role is primarily to set and run centre lathes, experience on turret and bed mills is also highly desirable. The production operative will work safely on a number of machines or processes and will be expected to meet set production and quality targets on a daily basis.

Required Skills:

Conventional turner should be a formally qualified apprentice with ideally 3-5 years of experience of working in a production environment. If not apprentice qualified, then they should be time served, preferably with about 5-7 years of experience of working on centre lathes in a production environment.

- Knowledge of machining composite materials (desirable). Turners should be confident in turning parts ranging from 5mm in diameter up to 1800mm in diameter and possibly even bigger in future. Part lengths will range from around 2mm up 3000mm.

- Machinists must be confident in their abilities to calculate angles, radii etc to meet customer drawing features. Likewise, the ability to design and where necessary make tooling to aid in the machining of specific features will be highly advantageous.

- Majority of items to be machined will be washers, flanged bushes, plain bushes, grooved bearings and split bearings. Experience of eccentric turning and trepanning is also required.

- The machines to be used range from small lathes such as a Holroyd groover and Colchester student lathe to mid-range lathes such as Broadbent Stanley 3m long bed lathe and Cochester Mastiff lathe. Various vertical borers will also be used so experience on those will be beneficial.

- Operators self-inspect their work with operation First Off's having a secondary inspection performed by a fellow operator before being signed off. As such, it is expected that skilled operators will be confident in the use of standard hand-held inspection equipment with knowledge of CMM and Shadowgraph use considered an advantage.

- Experience of working in a target driven production environment

- Furthermore, as skilled machinists it is expected that they will be able to read and interpret engineering drawings with a good understanding of the related G,D & T symbols and how they apply to the part.

Responsibilities

- Ensure any activities you carry out are done with Health and Safety criteria at the forefront - i.e ensure Safe Working Procedures, Risk Assessments and Lock out/Tag Out procedures are read and understood before operating any equipment on site.

- Raise any performance or H&S issues immediately with the shift leader or supervisor.

- Meet production and quality criteria on a daily basis.

- Ensure documentation is completed fully and accurately when performing any duties on the shop floor.

- Carry out quality checks on products and record the information accurately.

- Make suggestions on how to improve the processes in relation to production quality or manufacturing time.

- Maintain a high level of housekeeping standards in any area you operate

- Assist in training and mentoring new operatives and apprentices in that cell

- To carry out additional reasonable duties as required by business needs.

Benefits ;

- 26 days of annual leave

- 3% Employer Pension Contribution

- Income protection scheme and Private medical cover

- Cycle to work scheme

Closing date is 15 th of September 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client.

To Apply please follow the application process for the site this job is advertised on or email your CV to maria.thorne@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
Manual Miller
£ 25000 - £ 40000
Posted: 11 August 2022
Expires: 10 September 2022

Manual Miller

Job Type: Permanent

Location: Gloucester

Hours of work: Shift (0600-1400/1400-2200/2200-0600)

Salary: £25,000 to £36,000 Inc double days shift allowance or £25,000 to £40,000 Inc night shift allowance

Summary:

Our client is UK specialist in composites and mouldings based in Gloucester are currently recruiting for a Manual miller to join them. It is an exciting time to join a fast-growing company where opportunities have arisen for a right candidate. Skilled conventional miller required to work on a variety of production machinery. While the role is primarily to set and run turret and bed mills, experience on centre lathes is also beneficial. The production operative will work safely on a number of machines or processes and will be expected to meet set production and quality targets on a daily basis.

Required Skills:

- Candidate should have a formal apprentice qualification with ideally 3-5 years experience of working in a production environment, or 5-7 years of working on a manual milling machine (turret mills or bed mills) in a production environment.

- Ability to setup and machine a range of features on parts such as tapers, slots, radiused grooves to name a few. Be able to consider methods to setup and clamp parts to achieve desired features.

- Must be confident in their abilities to calculate angles, radii to meet customer drawing features. Ability to design and where necessary make tooling to aid in the machining of specific features will be highly advantageous.

- Knowledge of machining composite materials (desirable).

- Setting and operating radial arm drills and pedestal drills is also required.

- Self-inspect their work with operation First Off's having a secondary inspection performed by a fellow operator before being signed off. As such, it is expected that skilled operators will be confident in the use of standard hand-held inspection equipment with knowledge of CMM and Shadowgraph use considered an advantage.

- Experience of working in a target driven production environment.

- It will be the Manual Millers responsibility to be able to read and interpret engineering drawings with a good understanding of the related G, D & T symbols and how they apply to the part.

Responsibilities :

Ensure any activities you carry out are done with Health and Safety criteria at the forefront. Maintain and Meet production and quality criteria daily, whilst ensuring documentation is completed accurately.

Benefits ;

- 26 days of annual leave

- 3% Employer Pension Contribution

- Income protection scheme and Private medical cover

- Cycle to work scheme

Closing date is 15th  of September 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client.

To Apply please follow the application process for the site this job is advertised on or email your CV to maria.thorne@hawk-3.com. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future

Save Full details
Trainee Logistics Assistant
£ 15007 - £ 18451
Posted: 22 July 2022
Expires: 21 August 2022

Hawk 3 Talent Solutions are operating as an employment agency on behalf of its client .

Permanent

Location: Pudsey, Leeds.

Salary: £15,007 - £18,451p/a (Depending on Experience) Attendance Bonus 

Working Hours: Monday - Thursday (08:00am - 16:30pm) & Friday (08:00 - 13:00pm)

Main Responsibilities of the Trainee Logistics Assistant

Goods Inwards

      Taking receipt of consignments from deliveries

Checking consignments to delivery notes/booking goods into the SAP system/storage of goods, maintaining high levels of accuracy.

Filing all delivery/consignment notes in a confidential manner

Rolling inventories

Issuing goods to production orders and issuing to production

Updating data within excel for analysis

Despatch dept.

      Packing/labelling goods ready to go into stock lines or dispatch.

Booking finished materials into the SAP system

Despatching consignments/booking shipments through online carriers

Rolling inventories

Experience and Skills required

The ideal candidate should be educated to GCSE level C or above in maths and English, and be competent using a PC (experience with MS Office would be an advantage).

Closing date is 22.08.2022

To Apply please follow the application process for the site this job is advertised on. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website.

Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgments solely on suitability for the job. By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy . Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Save Full details